weberpral M Render

Through colour monocouche render which can achieve a scraped or roughcast finish – suitable for most types of brick or blockwork.

A single coat render applied in two passes means fast application with shorter programme periods, reduced scaffolding and site costs, as well as earlier completion of ground works.

About this product:

weberpral M is a through-coloured monocouche render which is ideal for new build or refurbishment projects. Monocouche can be used to produce a range of finishes:

• Scraped: Applied to a total thickness of 18mm scraped to 15mm
• Sprayed roughcast: Applied to a total thickness of 15-25mm
• Dry dash: Applied to a total thickness of 15-20mm before applying aggregates

weberpral M can be used to create ashlar and quoin features, and is suitable for use on entire elevations, feature panels or smaller areas such as garden walls.

Features and benefits:

Final façade finish:

• Finished with either a scraped texture, sprayed roughcast texture or can be dry dashed
• Can be finished with ashlar and quoin detailing
• Weather and algae resistance for low maintenance

Application

• Applied in two passes as a single coat for shorter programme periods
• Formulated to be spray applied by render pump for faster application but can also be applied by hand with a hawk and trowel
• Can be used onto most types of masonry

Certification & classification

• BBA approved (Certificate number 17/5464)
• Accepted by the NHBC in relation to NHBC standards
• A1 reaction to fire classification in accordance with BS EN 998-1:2016 5.3.3
• Wc2 water capillary absorption classification in accordance with BS EN 1015-18:2002 (EN 998-1:2016)

Sustainability

• Environmental Product Declaration (EPD)
• 7.5kg CO₂ per 1kg of weberpral M (Chalk)
• 8kg CO₂ per 1kg of weberpral M (Colours)

Things to consider:

• Do not apply if frost is forecast within 24 hours of use
• Do not apply in damp or wet conditions
• Do not apply in temperatures below 5°C or above 30°C
• Do not apply in direct sunlight or where the substrate is hot
• Not suitable for use on construction board substrate (concrete particle board/render board)
• Not suitable for use on insulation board substrate
• When stored unopened in a dry place at temperatures above 5°C, shelf life is 12 months from the date of manufacture printed on the side of the bag